Jack Stands

 

Torin T43004 jack stand with block on saddle.
ESCO 10499 jack stand with 4" rubber padded post.
ESCO 10498 jack stand with 4" rubber padded post.

Modified Torin T43004

ESCO 10499

ESCO 10498

Dimensions for Torin T43004, ESCO 10498 and ESCO 10499 jack stands.

ESCO 10499 Jack Stands in lower most 11" high position raises SL550 front tires 2" off ground.

ESCO 10499 jack stands with Mercedes SL550.

Shop Now!

Custom post for ESCO 10498 and ESCO 10499 jack stands.

Alternate post with pivoting block for ESCO 10498 and ESCO 10499 jack stands. Block fits BMW, Mercedes-Benz, and Nissan GT-R chassis jack points. Made in USA.

 

Modified ESCO 10498 and Torin T43004 Jack Stands for DIYers Who Care About Their Cars

Reverse Logic offers three jack stand models which are compatible with vehicles which incorporate vehicle jack pockets in the chassis jack points.

 

The Torin T43004 aluminum jack stands with blocks will fit into the plastic jack points on late model BMW, MINI, Mercedes-Benz, and Nissan GT-R chassis. The aluminum blocks are 52mm long by 30mm wide by 28mm high. The blocks can be attached to the saddle with a single bolt inserted from the bottom of the inner tube. Or, the blocks can be fitted with a 10mm pin and inserted into the hole in the jack stand saddle. Since the jack stands are positioned inside the vehicle jack pocket, they will be in the ideal location for supporting the weight of the car and won’t damage the jack points.

 

The ESCO 10498 jack stands have a large 4" diameter rubber padded flat top that won't damage the jack points on your high end luxury car. Reverse Logic also offers the ESCO 10499 jack stand which is a shortened version of the 10498 jack stand. The 10499 stand is perfect for modern low ground clearance cars with jack points located along the side skirts and between the axles. In addition to the rubber padded posts, Reverse Logic offers a custom Pivot-Top™ post with a pivoting block which fits the jack points on BMW, MB, and Nissan GT-R chassis.

 

ALWAYS USE JACK STANDS IN PAIRS. DO NOT SUPPORT YOUR CAR WITH ONE, THREE, OR FOUR JACK STANDS. USE WHEEL CHOCKS IN FRONT AND BEHIND THE WHEELS ON THE GROUND.

 

Download instructions for using modified Torin jack stands: Torin Jack Stand Instructions

 

International orders for the Torin jack stands are shipped via USPS Priority Mail. Select “Canada” or “Other International” as the "Destination" in the shopping cart. Reverse Logic does not ship the ESCO jack stands to AK, HI, PR, or International destinations.

 

Copyright © 2007 - 2017 Reverse Logic Limited. All rights reserved.