BMW Jack Pad Tools for BMW & MINI

BMW/MINI

BMW jack pad compatibility chart
BMW Jack Pad Tool

R50JPT

BMW Jack Pad Tool

E88JPT

19mm high multi-vehicle jack pad tool

MV52-30-19

Multi-vehicle jack pad tool with 30mm stem

MV52-30-28 w/optional 30mm pin

Shop Now!

BMW Jack Pad: Chassis Specific Jack Pad Tools for BMW & MINI

Reverse Logic Limited offers BMW jack pad tools for chassis which have jack points with an integrated vehicle jack pocket. The R50JPT model fits most "Exx" and the earlier BMW "Fxx" chassis. The E88JPT model fits the E88, E93, and most newer BMW "Fxx" chassis. Consult the application chart to the left to determine which jack pad tool fits your vehicle. The base for both the R50 and E88 tools is 68mm in diameter by 11mm thick. The jack pad tools should be used with floor jacks which have a 3" diameter or larger saddle.

 

The Silicone plugs in the R50/E88 tools provide a friction fit in the jack point pockets. When the tools are suspended from the jack points it is very easy to align a floor jack with the jack point. The Silicone plugs are pressed into holes in the block and expanded with a small plastic screw.

 

The dimensions of the blocks on our multi-vehicle tools allow them to be used in all late model BMW vehicles. The MV52-30-28 (28mm high) jack pad tool also fits most non-AMG Mercedes-Benz chassis and the Nissan GT-R. The shorter MV52-30-19 (19mm high) tool also fits all BMWs, the Nissan GT-R and Mercedes vehicles which use the W221 jack point. The multi-vehicle  jack pad tools do not incorporate the Silicone plugs and do not hang from chassis jack points. Optional 25mm and 30mm pins are available for the MV tools for use with floor jacks which feature a removable saddle.

 

Copyright © 2007 - 2017 Reverse Logic Limited. All rights reserved.