Reverse Logic Limited

Race Ramps, Jack Pad Tools, Lug Bolt Guide Tools and Jack Stands for DIY Auto Maintenance

Save 10% Store-Wide on Orders of $200 or More! Enter Coupon Code "SAVE10" at Checkout.

Light Weight, Low Profile Race Ramps Service Ramps and Trailer Ramps

Shop Now!

 

Reverse Logic Jack Pad Tools for Audi, BMW, Corvette, MINI, Mercedes-Benz, Nissan GT-R,  Porsche, Tesla, and VW

Do-it-yourselfers who are passionate about their cars will appreciate the innovative and practical solution that Reverse Logic jack pad tools offer.

Jack Pad Tool for Audi

Audi

Most of our chassis specific tools hang from the jack points of your car and prevent damage to the side skirts and undercarriage of your car while using a floor jack.

 

Our tools with spring loaded bullet latches fit most Mercedes-Benz chassis introduced after the 2000 model year. Late model BMW and MINI Cooper chassis and the Nissan GT-R will accept our jack pad tools with silicone plugs which retain the tools in place.

Our jack pad tool for Corvette C5/C6/C7 chassis  features an innovative T-nut which allows the tool to be used in one of two ways. It can be suspended from the jack point or secured in place for extended maintenance periods.

 

The jack pad tool for Porsche uses a custom T-nut sized to fit the oval hole in the jack point of Porsche 964, 991, 996, 986, 997, 987, and 981 chassis.

 

Tesla Model S and Model 3 chassis specific jack pad tools are the latest addition to the Reverse Logic jack pad product line.

Mercedes-Benz W203 jack pad tool

Mercedes-Benz

Reverse Logic Multi-vehicle jack pad tool

Multi-vehicle

Nissan GT-R R35 jack pad tool

Nissan GT-R

Corvette C5/C6/C7 jack pad tool

Corvette

Porsche jack pad tool for 964, 991, 993, 996, 986, 997, 987, and 981 chassis

Porsche

International Shipping. Orders for jack pad tools and lug bolt guide tools are charged a flat rate for shipping regardless of quantity. This charge is $10 for destinations in Canada and $15 for all other Countries.

 

Customers located outside of the Continental USA should request a shipping quote by email prior to placing an order for Race Ramps or jack stands. Reverse Logic does not ship Compac floor jacks outside of the Continental USA.

Prevent damage to calipers, wheels, and carbon ceramic rotors with Reverse Logic female threaded lug guide tools. Two or three of the tools will help guide your wheels on or off the hub without banging or scraping the calipers or chipping carbon ceramic rotors.

 

Available in four thread sizes, M12x1.5 for Corvettes, 1/2"-20 for pre-2015 Mustangs, M14x1.5 for Camaros and 2015+ Mustangs and M12x1.25 for Nissan GT-R and 370Z.

 

Reverse Logic also offers conventional male threaded lug bolt guide tools for European vehicles which use bolts to secure the wheels. The tools feature a pilot tipped thread for easy alignment in the lug bolt holes. The bull-nosed tip and smaller diameter on the outer end facilitate sliding the wheel over the tool.

 

The male threaded tools are available in M12x1.5, M12x1.25, M14x1.5, and M14x1.25 thread sizes. Consult the chassis compatibility tables on the Lug Bolt Guide Tools page to determine the thread size required for your European car.

ESCO jack stand post with pivoting block

Reverse Logic Pivot-Top™ Jack Stand Posts  for ESCO Jack Stands

Reverse Logic's stainless steel posts with pivoting blocks are compatible with ESCO 10498 and 10499 jack stands. The posts are available separately or with ESCO jack stand bases. The blocks fit BMW, Mercedes-Benz, and Nissan GT-R factory jack points with an integrated pocket for the vehicle jack. The block is held in place with a spiral retaining ring and can be easily removed.

Pivoting 63mm diameter rubber padded saddles are now available with the same stainless steel posts originally offered with the pivoting blocks. These saddles work well with pre-2000 BMW and MB chassis with older style jack points. The new round saddles can be easily exchanged with the pivoting blocks.

Female Threaded Lug Guide Tools Available in Four Thread Sizes

BMW

RLL-80-2 2-stage incline Race Ramps

Race Ramps makes over 60 different automotive ramp models for a range of applications. The lightweight ramps are easy to use, transport, and store. Reverse Logic adds value by supplementing the Race Ramps product line with "custom" designs for edge cases that need something different than what is offered by the standard products.

Tesla

RLL-116-3-14HD Race Ramps RLL-116-3-14HD+EXT Race Ramps

The Race Ramps RLL-116-3 ramp model is a three-section ramp with three progressively steeper inclines. An optional 32" extension is available for longer wheelbase cars. All of the sections are less than 48" long allowing the ramps to be transported in a mid-size SUV or short-bed pickup. This ramp was developed to meet the requirements of customers wanting to service or inspect very low ground clearance cars in the field.

 

For very low ground clearance cars, it may not be possible to drive onto a 12" high ramp without scraping the other end of the vehicle on the ground. The RLL-116-3 ramp addresses this issue by simultaneously lifting both axles. While this ramp does not provide a full level lift, it does raise one axle 12" and the other axle 3" to 5", which is typically enough to roll a floor jack under the lower end. The RLL-116-3 model Race Ramps (and extension if necessary) are like Race Ramps service ramps with integrated Roll-ups.

 

 

New Model RLL-116-3 12" High Cradle Top Platform Service/Inspection Ramps

Tesla jack pad tool.

Chassis Specific Jack Pad Tools for Tesla Model S and Model 3

Reverse Logic jack pad tools for the Tesla Model S and Model 3 chassis take the guess work out of positioning a floor jack beneath the vehicle jack points. The post on the jack pad precisely locates the tool in the center of the jack point on the car. The tool provides a comfortable amount of clearance between the batteries and the rim of the floor jack saddle.

 

The groove around the circumference of the tool makes it easy to remove when maintenance is completed. The tool is machined from Acetal and uses a Silicone O-Ring to "grab" onto the vehicle jack point. No modifications to the vehicle jack points are required to use the tool.

Trademark acknowledgments. C-Class, CL, CLK, CLS, E-Class, GL-Class, M-Class, Mercedes-Benz, R-Class, S-Class, and SLK are registered trademarks of Daimler AG Corporation. The BMW name, model names, and logo are registered trademarks. The MINI name, MINI COOPER, MINI COOPER S, and logos are registered trademarks. GT-R is a registered trademark of Nissan Motor Co., Ltd. Race Ramps, Trak-Jax and Flatstoppers are trademarks of Brute Industries, Inc. Stahlbus is a registered trademark of Stahlbus Gmbh. Tesla, Model S, Model X, and Model 3 are registered trademarks of Tesla, Inc.

Copyright © 2007 - 2018 Reverse Logic Limited. All rights reserved.