What's New from Reverse Logic

Floor Jack Extender Adds 4" to Lift Range. 25mm and 30mm post.

Shop Now!

February 2017. The Reverse Logic 100mm tall (about 4") floor jack extender is compatible with floor jacks featuring a removable saddle. The extender can be used with vehicles which have high ground clearance (i.e. SUV) or to get additional lift from your floor jack in order to raise the tires high enough off the ground to use Race Ramps wheel cribs.

 

The floor jack extender can be assembled in two different configurations. If the 30mm end of the stainless steel bar is inserted into the 30mm hole of the spacer, then the extender tool will work with a floor jack that has a 25mm stem on the saddle. The existing floor jack saddle can then be inserted into the 25mm diameter hole in the spacer. If the 25mm end of the stainless steel bar is inserted into the 25mm hole of the spacer, then the extender tool will work with a floor jack that has a 30mm stem on the saddle. The existing floor jack saddle can then be inserted into the 30mm diameter hole in the spacer.

Copyright © 2007 - 2017 Reverse Logic Limited. All rights reserved.